call us : (808) 597-8585 Mon - Sat: 8:00am- 5:00pm

ABOUT SOLAR WATER HEATING SYSTEM TECHNOLOGY

SOLAR WATER SYSTEMS


In a nutshell, solar water heating collectors capture and retain heat from the sun then transfer this heat to liquid water. Solar thermal heat is trapped using the “greenhouse effect,” which utilizes the ability of a reflective surface to transmit short wave radiation and reflect long wave radiation. Heat and infrared radiation (IR) are produced when short wave radiation light hits a collector’s absorber, which is then trapped inside the collector. Fluid, usually water, in contact with the absorber collects the trapped heat to transfer it to storage.

Two principles govern solar thermal collectors. First, any hot object eventually looses its heat back to the environment. The efficiency of a solar thermal collector is directly related to heat loss, mainly from convection and radiation. Thermal insulation is used to slow down heat loss from a hot object to its environment.

Second, heat loss is more rapid if the temperature difference between a hot object and its environment is larger, in this case between the temperature of the collector surface and the ambient temperature. (But the same goes for transferring heat from the collector to the fluid, a larger difference between the collector and the liquid, the more heat is transferred.)

The most basic approach to solar heating of water is to simply put a tank filled with water into the sun. The heat from the sun would heat the metal tank and the water inside. This was how the very first SWH systems worked more than a century ago. However, this setup would be inefficient because there is little to limit the heat loss from the tank. Adding an insulated box around the tank, and adding glass above the top where the sun comes in would do a lot to retain heat.

A more common collector is called a flat plate collector. It has a large, flat surface area (absorber) to maximize exposure to the sun, and has small tubes bonded to it. Fluid runs through the tubes, collecting the heat from the absorber. The sides and bottom of the collector are well-insulated, and glass on top completes the insulation.

This is quite simple, but there are some very technical factors involved in making the collector as efficient as possible. One is the coating on the absorber, which is specially formulated to both absorb as much heat as possible, and to radiate back out as little heat as possible. Another is the glass, which is high-iron and specially coated to let as much light energy as possible through and to also prevent as much heat loss as possible.

Another popular type of collector is called evacuated tube, which has a long, skinny absorber that is inside a glass tube. The tube has the air evacuated out of it, which makes it highly insulated—not too different from a thermos used to keep drinks hot.

The final type of collector is a parabolic dish or tray, which increases heat potential by concentrating sunlight onto a small absorber. These are very rare in home water heating systems, and more commonly used in utility-scale systems to create steam which runs turbines to make electricity.

The basic components in home solar heating systems include

  • Collectors to take the heat from the sun and pass it to a fluid
  • The heat transfer fluid which takes the heat from the collector for use or storage
  • Heat exchangers to transfer the heat from the fluid to a home’s domestic water.
  • Pumps to move the fluid through the collector and/or the exchanger, and sometimes to move the domestic water through the other side of the exchanger.
  • Controllers to run the pumps when there is collector heat available.

WHY CHOOSE US


With over a decade of experience, you can rely on Kamaaina Plumbing & Renovations for your next project. We provide the highest quality plumbing and renovation services with a dedicated focus on customer satisfaction.

Over 37 Years of Experience

Superior Quality and Craftsmanship

Local and Reliable

License, Bonded, and Insured

On Time and on Budget

Customer Satisfaction Guarantee

FREQUENTLY ASKED QUESTIONS


Do I need to obtain permits from the County before installing a Solar Hot Water system?

There is a standard permitting process for any type of Solar system installation. Kamaaina Plumbing will work with you to submit all the proper paperwork to ensure your permit is approved.

How can a Solar Hot Water system be applied?

Domestic hot water. This covers showers, dish washing, and clothes washing. Hot water is stored in a tank for when it is needed. An energy efficient household might use less than half of that amount.

Pool heating. This is a very easy use of solar water heating technology, and the equipment is minimal and less expensive.

What are the financial benefits?

Solar Water Heaters can cut your energy bill nearly in half, and qualifies for federal and state tax credits—which can result in a significant deduction. Kamaaina Plumbing & Renovations will assist you in obtaining any available tax credits and incentives.

READY TO GET THAT LEAK OR OLD PLUMBING SYSTEM FIXED?

CALL US TODAY: 808-597-8585